What is DensArmor used for

Moisture- and mold-resistant1, DensArmor Plus Abuse-Resistant Panel is formulated for high traffic areas such as corridors in hospitals, schools and other public buildings. This tested, abuse-resistant, interior drywall resists abrasions, gouging, indentation, scrapes and bumps that can mar traditional drywall.

Is DensArmor waterproof?

The unique moisture-resistant features of DensArmor Plus Interior Panels allow builders to install interior gypsum assemblies when it’s not feasible to wait until building is dried in. Paper-faced products are often damaged by wind-driven rain and moisture during installation.

Is DensArmor plus fire rated?

DensArmor Plus Fireguard exhibits 15 flame spread as tested per ASTM E 84 or CAN/ULC S-102. A specially formulated gypsum core that includes glass fibers allows DensArmor Plus Fireguard to help protect framing members and prevent or delay the spread of fire.

Who makes DensArmor plus?

ToughRock DensArmor Plus 5/8 in. x 4 ft. x 12 ft. Fiberglass-Mat Gypsum Drywall-10774 – The Home Depot.

Can you paint DensArmor plus?

To maximize the mold-resistant benefit of the DensArmor Plus Interior Panels, a 100% acrylic primer with mildecide should be used. … High-quality flat or satin paint should be applied over the primer.

Can you paint DensGlass?

DensGlass Sheathing is an ideal product for exterior ceilings and soffits for both cold and warm climate zones. It resists sagging, even under exceptionally humid conditions. Panels are applied directly to structural framing. Surface and joints may be finished and painted, or surfaced with an exterior finish system.

What is abuse resistant drywall?

Interior abuse resistant drywall is specially designed to provide abuse resistance in wall applications. … This combination affords greater resistance to abuse and sound transmission in high traffic areas than does regular gypsum board.

What can you use instead of drywall?

• Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well. …
• Veneer Plaster. …
• Lath & Plaster. …
• Plywood and Sheet Wood. …
• Texture Wall Panels. …
• Brick & Masonry. …
• Exposed Concrete Block. …
• Cement Board.

Can you stucco over DensGlass?

Stucco systems may be applied over DensGlass Sheathing using paper-backed metal lath or two layers of building paper and metal lath. … Install stucco system in accordance with the manufacturer’s instructions and local building code requirements.

What is purple drywall?

Our most versatile drywall product, PURPLE XP® Drywall is moisture-, mold- and mildew-resistant and ideal for almost every room in the home. Performance. Fire Resistant, Improve Air Quality, Mold & Mildew Resistant, Moisture Resistant. Project Area.

Article first time published on

What is glass mat gypsum?

Interior glass mat wallboard is a noncombustible interior panel that consists of a moisture resistant fiberglass reinforced gypsum core and coated fiberglass mat face, which increases the overall product strength (see ASTM C1658/C1658M-12).

What is eXP sheathing?

eXP® Sheathing consists of a moisture- and mold-resistant gypsum core encased in a coated, specially designed PURPLE fiberglass mat on the face, back and sides. The glass mat is folded around the long edges to reinforce and protect the core, and it provides superior weather resistance.

Is drywall mold-resistant?

Modern mold-resistant drywall combines the moisture resistance of older green board with materials and engineering that also make it quite resistant to mold. … But in rooms that experience frequent humidity and are often subject to mold and mildew, such as bathrooms or basements, mold-resistant drywall is a good choice.

What is exterior drywall?

Physical Description. Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.

Can you paint DensArmor?

For best results when painting DensArmor®/ DensArmor PlusTM , G-P Gypsum requires the use of a high quality, high build drywall primer/surfacer. Follow the application instructions of the primer manufacturer stated on the container.

How much does abuse resistant drywall weigh?

Weight: 2.8 lbs per SF (13.7 kg/m2) Edges: Tapered. Packaging: Two pieces per bundle, face-to-face.

What is high impact gypsum board?

XP® Hi-Impact® Gypsum Board offers the same mold, moisture and abuse resistant features as XP® Hi-Abuse® Gypsum Board, and in addition, it has fiberglass mesh embedded into the core, providing even more impact/penetration resistance. It also has a specially formulated core to provide fire-resistance ratings.

What is the fire rating of type C drywall?

Type C drywall is known as the more durable version of Type X—there are more glass fibers in this product as well as more vermiculite components, giving it a fire resistance of 2-4 hours. You can find this product at your local drywall and insulation store in 1/2” and 5/8” thickness.

How do you seal DensShield seams?

By caulking the intersecting corners of DensShield Tile Backer panels and around a tub base or shower pan with flexible sealant, a moisture-resistant envelope can be established. The sealant should be applied to the DensShield Tile Backer corners PRIOR to taping the joints.

Can you paint over DensShield?

Easier to handle than cement board, DensShield Tile Backer cuts and installs like drywall without special tools or fasteners. It can also be painted or used in non-wet areas.

What is the best backer board for a shower?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Can DensGlass be used as roof sheathing?

DensGlass® Sheathing DensGlass Sheathing adds performance and durability to a wide range of fire-rated and non-fire-rated building assemblies. Dens® Solutions are industry trusted, high-performing fiberglass mat gypsum panels suitable for your wall, roof, ceiling and floor projects.

Can DensGlass be used for shear walls?

The DensGlass® sheathing panels may be used as a component of engineered shear walls when designed in accordance with IBC Sections 2305 and 2306 for wood framed walls or Section 2211.6 for light-gage steel- framed walls.

Is DensGlass exterior sheathing structural?

DensGlass SilverTM residential structural wall sheathing incorporates the proven glass mat Dens TechnologyTM with a moisture-resistant core to produce a residential exterior sheathing that: Meets requirements of ASTM C 1177 and applicable sections of ASTM C 79. … Provides moisture resistance.

What is the difference between DensDeck and DensGlass?

DensDeck may be used above vertical membranes DensGlass Sheathing is appropriate for finishing the rest of the vertical surface above the membrane, but DensDeck Roof Board could also be used, so there’s only one substrate material to deal with.

Does DensGlass need a vapor barrier?

The energy code requires continuous air barrier on either the interior or exterior wall in certain climate zones.

What is the cheapest way to cover a ceiling?

1. Paint. It’s a great way to change the perception of your space. …
2. Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. …
3. Moldings and More. …
4. Tiles or Planks.

How can I make my walls smooth without plastering?

1. Fill Holes or Cracks. Before you do anything, fill any holes and cracks in your wall. …
2. Sanding. If your old plaster is a bit lumpy and bumpy, sand it to smooth out any bumps. …
3. Clean the Wall of Scuffs & Marks. …
4. Hang Wallpaper. …
5. Paint Your Walls.

Is sheetrock the same as drywall?

Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.

What is the difference between PURPLE and green Sheetrock?

What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall, manufactured only by Gold Bond Building Products, is superior because it offers moisture, mold and mildew resistance.

What is green drywall?

Green board drywall, also known as moisture-resistant drywall, has a green covering that makes it more resistant to moisture than regular drywall. … It is also often used as a tile backer in limited wet areas such as bathroom and basement walls, plus kitchens, and laundry and utility rooms.