What does slash subnet mean
Rachel Hickman
Published May 07, 2026
The slash and the number following it is just a shorthand way to write a subnet mask. It’s called CIDR (Classless Inter-Domain Routing) notation. It’s also commonly referred to as the prefix length. The number after the slash represents the number of consecutive 1’s in the subnet mask.
What is the subnet for Cidr 24?
CIDRSubnet mask# of IP addresses/24255.255.255.0256/23255.255.254.0512/22255.255.252.01,024/21255.255.248.02,048
What should my subnet mask be?
Most home networks use the default subnet mask of 255.255. 255.0. … This is the default subnet mask used by Class B networks and provides up to 65,536 IP addresses (256 x 256). The largest Class A networks use a subnet mask of 255.0.
What does the 24 mean in an IP address?
2.0/24”, the number “24” refers to how many bits are contained in the network. … As all IPv4 networks have 32 bits, and each “section” of the address denoted by the decimal points contains eight bits, “192.0. 2.0/24” leaves eight bits to contain host addresses. This is enough space for 256 host addresses.How do I know my subnet mask?
- Go to Settings > Wireless & Networks > Wi-Fi.
- Tap on the network you’re connected to.
- You will find the subnet mask along with other network details.
How do you explain subnet mask?
A subnet mask is a 32-bit number created by setting host bits to all 0s and setting network bits to all 1s. In this way, the subnet mask separates the IP address into the network and host addresses. The “255” address is always assigned to a broadcast address, and the “0” address is always assigned to a network address.
What does the IP adress 172.17 4.250 24 represent?
4.250/24 represent? Explanation:The /24 shows that the network address is 172.17. 4.0. The broadcast address for this network would be 172.17.
How many 24 networks are in a 16?
Since you have 8 more bits to use to define the network in the /24 subnets under the /16, there are 256 /24 subnets in a specific /16.What is the subnet of an IP address?
A subnetwork or subnet is a logical subdivision of an IP network. The practice of dividing a network into two or more networks is called subnetting. Computers that belong to the same subnet are addressed with an identical most-significant bit-group in their IP addresses.
What is the subnet mask of 192.168 1.0 24?CIDR blockIP range (network – broadcast)Subnet Mask192.168.1.0/25192.168.1.0 – 192.168.1.127255.255.255.128192.168.1.0/24192.168.1.0 – 192.168.1.255255.255.255.0192.168.0.0/23192.168.0.0 – 192.168.1.255255.255.254.0192.168.0.0/22192.168.0.0 – 192.168.3.255255.255.252.0
Article first time published onWhat is the slash notation for the subnet mask 255.255 248.0 eg 24?
Subnet MaskCIDR PrefixNumber of /24 networks255.255.255.0/241255.255.254.0/232255.255.252.0/224255.255.248.0/218
How do you read a subnet?
The Subnet address is identified by all 0 bits in the Host part of the address. The first host within the subnet is identified by all 0s and a 1. The last host is identified by all 1s and a 0. The broadcast address is the all 1s.
How do I find my IP address and subnet mask?
- In the Windows search fields, type cmd, to open command prompt.
- Press Enter.
- Type ipconfig/all press Enter.
- Find your network settings.
- Your PC’s IP address and your network Subnet Mask and Gateway will be listed.
What is the size of IPv4?
An IPv4 address is 32 bits. An IP Address is shown as 4 decimal numbers representing 4 bytes: d.d.d.d where d = decimal number (0 – 255). High order bits are the network identifier and lower order bits are the host identifier.
How does subnet mask affect IP address?
Subnet mask divides the IP address into a network address and host address, hence to identify which part of IP address is reserved for the network and which part is available for host use. Once given the IP address and its subnet mask, the network address (subnet) of a host can be determined.
Can two computers with different subnet masks communicate?
If two computers are on different networks, they have a different subnet mask and they can’t communicate to each other, unless connected by a router.
What does subnet mask tell a router?
A subnet mask determines which parts of the IP address are network and host identifiers. It is a 32-bit number that distinguishes each octet in the IP address.
How do I find my subnet number?
The number of subnets is found by counting the number of bits by which the initial mask was extended, also known as the subnet bits. Our initial address allocation was 192.168. 0.0 with a mask of 255.255. 0.0.
What is subnet mask ps4?
A subnet mask is a number that outlines a range of IP addresses that are available within a given network. It is a 32-bit number that masks an IP address and divides the IP address into the network address and host address.
What is my IP address subnet mask and default gateway?
Where can I find my IP address, Default Gateway, Subnet Mask, and DNS Servers? If you have a Windows PC, You can get this information by running “ipconfig /all” from the cmd window. Click on Start from the taskbar and select “Run”. Then enter CMD and click “OK”.
What subnet mask is represented by the slash notation 26?
Network MaskSlash Equivalent255.255.0.0/16255.255.255.0/24255.255.255.128/25255.255.255.192/26
Why does a Layer 3 device perform the ANDing process on a destination IP address and subnet mask?
Why does a Layer 3 device perform the ANDing process on a destination IP address and subnet mask? Explanation: ANDing allows us to identify the network address from the IP address and the network mask.
Which among the IP addresses are considered public address?
Note: All servers and sites on the Internet use public IP addresses (for example, google.com — 172.217. 22.14, Google’s DNS server — 8.8. 8.8). All public IP addresses on the Internet are unique to their host or server and cannot duplicate.
What does subnet mask 255.255 255.0 tell a router?
The subnet is just the allocation of the IP addresses. For example, if a router sees 255.255. 255.0, this means that whatever ip address the device has also belongs to a network with potentially 253 other device addresses.
What does the subnet mask 255.255 255.0 tell a router coursera?
What does the subnet mask 255.255. 255.0 tell a router? The purpose of the part of the mask that reads 255, or all 1s in binary, is to tell a router what part of an IP address is the subnet ID.
Do Subnet Masks have to match?
Subnet masks always work from left to right. Devices are said to be within the same subnet if their IP Address starts with the same digits, but ends with a different set of digits. … If the subnet mask is 255.255. 255.0, then the first three octets of all devices must be the same.
How many subnets are there?
To calculate the number of possible subnets, use the formula 2n, where n equals the number of host bits borrowed. For example, if three host bits are borrowed, then n=3. 23 = 8, so eight subnets are possible if three host bits are borrowed.
How many IPS are in a subnet?
Essentially, a subnet is a smaller portion of the network within class A, B, or C. Creating and using subnets can help to keep your network organized and functional. Each IP address block can create 254 IP addresses, which allows 254 x 4 total IP addresses to be created for use in the network.
When would you use a 32 subnet mask?
/32 mask is used only to designate a host, not network. I use them for loopbacks. /32 mask when applied to an interface defines only one address, which is useful for loopbacks because they don’t waste addresses. Additionally OSPF by default will advertise any loopbacks as a /32 regardless of the actual mask used.
What does the IP address 192.168 1.255 24 represent?
1.0/24, which has the broadcast address of 192.168. 1.255. “Broadcast domain” refers to all that is within the broadcast range, or all IP addresses that will receive a broadcast message within the Internet Protocol subnet.
What is the subnet mask of 200.2 1.0 IP address?
Class C IP Address 200.2.1.209Network NumberSubnet NumberFF.FF.FF.0200.2.1.0NoneFF.FF.FF.E0200.2.1.0200.2.1.192FF.FF.FF.F0200.2.1.0200.2.1.208