Is ChoiceDek discontinued

This decking is no longer being manufactured for Lowe’s.

Can ChoiceDek be painted?

The manufacturer does not recommend painting or staining ChoiceDek decking and railing. As with any outdoor surface, periodic cleaning is required. However, if you choose to paint or stain, please follow these recommendations: … Paint using high quality acrylic latex paint.

What happened ChoiceDek?

Advanced Environmental Recycling Technologies (AERT) has announced the settlement of a class action lawsuit involving Weyerhaeuser’s “ChoiceDek” composite decking product. Eligible customers may request to have their decks inspected, cleaned and treated with a mold inhibitor. …

Who makes ChoiceDek?

One composite product, ChoiceDek, reportedly has faced such mold- and mildew-growth problems that a class-action claim targeted Advanced Environmental Recycling Technologies (AERT) and Weyerhaeuser, respectively the manufacturer and distributor of ChoiceDek, which is sold only at Lowe’s.

What paint can you use on composite doors?

The right paint for a composite door is solvent-based paint. This paint forms a durable paint film over the surface of the GRP.

What is the longest Trex board?

Our square edge boards install traditionally like wood – with deck screws. 2 x 6 boards available in 12′, 16′, and 20′ lengths.

Can I stain my composite deck?

Can you stain composite decking? The short answer: yes. While composite decks like Trex aren’t designed or required to be paintable or stainable, like their natural wood counterparts, first generation composite decking can and will accept paint under certain circumstances – if properly cleaned, prepped and primed.

Can you use wd40 on composite doors?

Avoid using WD-40 or other cleaning agents, as these products tend to dry out quickly and won’t lubricate your door for long. For the locking mechanism, look to use a Teflon-based lubricant, which works to reduce friction and wear. Do not use oil or graphite powder, which will do more harm than good.

Can composite doors be repainted?

Yes, you can paint a composite door, but the real question is whether you should. If you use the correct materials and make the right preparation it is possible to get a good finish, however due to the outer layer being plastic it can be prone to chipping or flaking if a poor job is done.

How do you treat a faded composite door?

1. Prepare the surface. Firstly, prepare the door. …
2. Apply the Polytrol. Liberally apply Polytrol with a brush (you could also use a cloth) and then leave it to work for 10-20 minutes. …
3. Clean up. After finishing, clean the brush with white spirits.

Article first time published on

How do you make composite decking look new?

1. Step 1: Pre-spray your deck. …
2. Step 2: Spray with soapy water & scrub. …
3. Step 3: Rinse thoroughly. …
4. Step 1: Pre-rinse. …
5. Step 2: Mix up your vinegar solution. …
6. Step 3: Sprinkle baking soda. …
7. Step 4: Rinse thoroughly.

Should you paint composite decking?

Painting or staining vintage composite decking isn’t necessary to make the material last longer, but it can give the deck a new look — changing the color, eliminating stains from mildew or leaves, and evening out the color on decks where rugs or planters kept sunlight from reaching some areas.

What are the different grades of Trex?

Trex offers three tiers of composite decking—Transcend, Enhance, and Select. These are considered “good,” “better,” and “best,” with Transcend being best, Enhance being better, and Select being good.

Can you have a fire pit on a Trex deck?

The fire pit is not installed on top of the Trex decking. … Wood burning fire pits are not recommended on top of Trex decking unless using a product called DeckProtect™. Wood burning fire pits can damage the decking due to the extreme heat from the bottom of the fire pit and/or burning embers “shooting” onto the decking.

Is Trex Select better than Trex Enhance?

Trex Select is also considered slightly more scratch-resistant than Enhance, and the line comes in one more color. Trex Select’s five color options have a bit more range to them, from the warm, reddish Madeira to the rich, cool Winchester Gray.

What is the best way to clean a composite door?

To clean the frames and panels of your composite doors, all you need is a soft sponge and warm soapy water. This can be created using normal hand soap or washing up liquid. Clean all around the frame and panels to remove grit and grime. This can build up over time and cause problems when the door opens and closes.

How long does a composite door last?

A composite door should last at least 30 years. That’s a minimum of three decades performing at an extremely high standard. Composite doors are built to last. The average life expectancy of 30 years is a conservative estimate.

Do composite doors scratch easily?

Composite doors are low maintenance, robust and weather resistant do not rot, warp or crack, nor will it ever need painting. Composite doors tend to hide minor scratches and are easy to clean.

How do you get marks off a composite door?

Take a bucket of warm, soapy water and a nice soft cloth. These are all that’s required to wash away the dust and grime that may have built up. Never be tempted to use a rough-sided sponge or abrasive pad as these will damage the lovely finish to your door. After cleaning the door, use the water to wash the frame.

Why does my composite door creak?

Composite doors crack and creak due to the hot and cold temperatures of the weather. During the Summer, composite doors will expand making them harder to shut and open in some cases. … So it’s the expanding and shrinking of the door within the frame that causes the door to “pop” “creak” or “crack”.

Why has my black composite door faded?

Over time, composite doors may lose their colour. This is due to the corrosive properties of weather types like rain and sunlight over very long time periods. There is no such thing as composite polish, but there are multi-surface plastic restorers that be used on composite doors to revivify colour and lustre.

Do composite doors expand in the sun?

It’s completely normal for doors to swell, whether they are composite, wooden or uPVC. … When the sun shines on your door, it will naturally swell and expand further, making opening and closing almost impossible.

What are the problems with composite doors?

• Warping, bowing or swelling. Closing the door properly is important to avoid ‘warping’ damage to the door panel. …
• Sticky locks. …
• Dropped hinges. …
• Drainage issues. …
• Worn weather-seals.

Can you jet wash composite decking?

Yes, it is safe to clean TimberTech composite decking with a power washer. Here are some tips to bear in mind when you’re power-washing your deck: Before washing your deck, sweep away leaves and other debris with a broom. Use a fan tip nozzle and a suitable cleaning product.

Why is my composite deck turning white?

Probably the first thing a homeowner will notice is white spots on the deck. These are exposed wood particles bleached by the sun and rain. This is a sure sign that the deck’s seal has been damaged.

What can damage composite decking?

• Rust stains.
• Mold growing on deck boards.
• An improperly power washed deck.
• Use a broom to remove snow from your composite decking.

Can you put sealer on composite decking?

You don’t have to seal the surface once it’s been cleaned, but I suggest you do. By properly sealing or staining composite decking, you could get several years of use out of it before you need to clean it again. If you decide not to seal the deck, you will most likely need to plan on cleaning it again every year or so.

Can you sand composite decking?

Because you cannot sand composite decking, deep scratches are destined to remain in the boards, though over time, they may becomes less and less pronounced.

Can you stain wood composite?

A: Yes, you can stain worn composite decking, but since it doesn’t have genuine wood grain you’ll need to select an exterior stain/sealer with a solid color. First, clean the deck surface with a Deck Cleaning detergent and rinse thoroughly, as with any refinishing job.

Does paint stick to composite decking?

Yes. Although composite decks are not designed to be painted, they can still accept a paint layer nicely. Clean the surface properly and allow it to dry. Sand the composite surface to be painted along the direction of the grain.

Can composite wood be sanded?

After the composite is fairly smooth, switch to 800 grit sandpaper and sand until the composite is very smooth. You can use an orbital sander or sand by hand. Use a dry rag and acetone to remove dust, grease, and debris. Apply a primer.