Is 11/16 The same as 15mm

15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch.

What size socket is 11 16?

SAE SizeMetric SizeInches Decimal11/16″0.68818mm0.70923/32″0.71919mm0.748

What size is 11/16 spanner?

BOLT DIAMETER (INCHES)AF SPANNER SIZE (INCHES)SPANNER SIZE (MM)11/16 INCH17.46 MM1/2 INCH3/4 INCH19.05 MM9/16 INCH7/8 INCH22.22 MM5/8 INCH15/16 INCH23.81 MM

What is a 13/16 socket in MM?

Bolt DiameterMetricStandard7/16″16mm5/8″1/2″19mm3/4″9/16″21mm13/16″22mm7/8″

How many MM is a 11/16 socket?

SAEMetricInch17mm0.66911/16″0.68818mm0.70923/32″0.719

What size socket is between 10mm and 11mm?

Bolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm

What size is 11/16 in MM?

Dimensions — Inches to Metric0.688”11/16”17.48 mm0.750”3/4”19.05 mm0.813”13/16”20.65 mm0.875”7/8”22.23 mm

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

What is the next size wrench after 11 16?

Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What size wrench is between 11 and 12 mm?

InchesMillimetersSpanner0.43311mm11mm0.4387/16 AF0.4453/16 Wworth; 1/40.47212mm12mm

Article first time published on

What is a 16 mm in standard size?

MMApproximate Size In InchesExact Size In Inches15mmJust short of 5/8 Inch0.59055 Inches16mm5/8 Inch0.62992 Inches17mmJust short of 11/16 Inch0.66929 Inches18mmJust short of 3/4 Inch0.70866 Inches

What is a 10mm socket used for?

For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.

How do you convert Whitworth to MM?

Bolt dia.AF spanner size inchesSpanner size MM5/16 inch1/2 inch12.7 mm3/8 inch9/16 inch14.29 mm7/16 inch5/8 inch15.88 mm11/16 inch17.46 mm

What is the same size as a 10mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What size is 10mm spanner?

Nominal SizeSpanner SizeM610mmM711mmM813mmM1017mm

Do they make a 20mm socket?

Drive 12-Point Metric Standard Chrome Socket – 20mm, Cold Forged Steel Socket with SuperKrome Finish, Made in USA.

Is 3/8 and 10mm the same?

It’s the same size. 3/8 is in inch and and its 10mm.

Can I use a 12-point socket on a 6 point nut?

The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.

What is the decimal for 11 16?

Answer: 11/16 as a decimal is 0.6875.

Is M10 the same as 10mm?

If the size is M10 x 25, that would mean that the diameter is 10 mm. … The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

What are socket sizes?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).

How do you measure socket size?

1. Turn on the digital caliper and set it to read in inches, not millimeters. …
2. Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
3. Check the caliper display. …
4. Turn on the digital caliper and set it to read in millimeters, not inches.

What size wrench is between 11/16 and 3 4?

A 3/4 inch socket is right at 19 mm and a 11/16 socket is right at 17.5 mm. An 18 mm socket would be right in the middle between the two and should work well for you.

Is there a 33mm socket?

Capri Tools Deep Impact Socket, 1/2-Inch Drive, 6-Point, Metric (33 mm)

What is the equivalent to a 33mm socket?

Standard SAE US Wrench/Spanner Size (inches)Metric Wrench/Spanner Size (mm)1 1/431.7532331 5/1633.34

Can you use metric sockets on standard bolts?

Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

What is an inch and 1/16 in metric?

InchesMetricFractionalDecimalmm.0.05511.4000.0.05911.50001/160.06251.5875

What is 10 mm in fractions?

Millimeters (mm)Inches (“) (decimal)Inches (“) (fraction)10 mm0.3937 ″25/64 ″20 mm0.7874 ″25/32 ″30 mm1.1811 ″1 3/16 ″40 mm1.5784 ″1 37/64 ″

What can I use instead of a 10mm socket?

3/8th of an inch is the closest SAE wrench size to 10mm. Notice that the SAE (fractional inch) wrench sizes are not exactly equivalent to metric sizes.

What is the most common socket lost?

It seems like the 10mm bolt size is the most common bolt size across most cars so, naturally, you’re going to use the 10mm socket the most. But, since the 10mm socket is so small, if you don’t remember where you place it, this is the socket you’ll most likely lose, hence all the memes.