How thick is a closet rod

Most closet rods are 1 1/4 inches wide. This standard diameter gives the rod stability and prevents bending under heavy loads. A wood rod of this diameter is typically supported by a bracket every 34 inches. Angle brackets that mount to the back wall extend forward to support a closet rod that is 1 1/4 inches wide.

How deep are closet racks?

Closet shelves are NOT one size fits all. Ideally, they should be a variety of depths based on what each section needs to store. Builders commonly put in shelving that is 11 ¼” deep.

What is standard closet rod diameter?

Closet Rod Dowel Diameter A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.

How much space should be between shelf and closet rod?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

Can a closet be 20 inches deep?

When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.

What is shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What is a good shelf depth?

The shelves shouldn’t be too deep. The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.

How far from the wall should a closet rod be?

For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

How wide is a standard hanger?

Standard-sized adult hangers measure 17-18 inches. Our over-sized hangers measure 19″ wide, giving more support to heavy coats or larger jackets.

Can a closet be 22 inches deep?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

Article first time published on

What is the minimum depth for a wardrobe?

The minimum depth needed is 650 mm (25 1/2 inches). The standard depth of a wardrobe with hinged doors needs to be 500 mm but with a sliding wardrobe, you have to cater for the top track which is approximately 80 mm.

What is the standard height for a closet shelf?

Ideally, the top shelf of a closet is high enough to tuck items out of the way, but low enough that you can retrieve them without a stool. The recommended shelf height is between 87 and 96 inches from the floor. The shelf should also sit at least a foot away from the closet ceiling.

How deep should a wall shelf be?

As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.

How deep should Built in cabinets be?

The base can be fitted with drawers or doors to conceal electronics and accessories. Cabinetmaker Stewart True of True Carpentry and Cabinetry in Cummings, Georgia, says 36 inches is a good height for a base, while 20 to 24 inches is a good depth — deep enough for board games and electronics.

How deep is a closet drawer?

Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less. Standard heights are 5-inches, 7.5-inches, 10-inches and 12-inches.

How much weight can a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

How do you install a closet rod in drywall?

1. Measure the size of the space where the closet rod will go.
2. Buy a closet dowel rod and cut it to length.
3. Choose a wall bracket that can be positioned so that you can screw it into wall studs.
4. Mark the place where your first bracket will be installed.
5. Drill pilot holes.

Do closet rods need studs?

Installing a closet rod in a closet without conveniently located studs is a simple job that requires no special tools or advanced carpentry skills. Closet rods are typically held by flange-type sockets that are attached to the wall, screwed into framing studs.

Do closet walls have studs?

Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. … If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.

How do I choose a hanger size?

The sizing principle for suits and jacket hangers is simple: the hanger should extend all the way to–but not beyond–the point where the shoulder meets the sleeve (the jacket’s sleeve head). The most accurate method of sizing your hanger is to measure directly across the back (the point-to-point measurement).

What size hanger do I need?

Children’s: Small children should use 10” hangers, and bigger kids need up to 14” ones. Petite women: Small women and young men should use 15 or 16” contoured hangers. Men and women: Adults should opt for 16 or 17” hangers. Men’s XL: 5 or 19” hangers are ideal for large men.

What is the size of a standard bedroom closet?

A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.