How thick are closet rods

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.

What is the strongest closet rod?

Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient. Even after being overloaded they are likely to spring back to their original shape due to the resilient quality of steel.

How do you make a closet rod stronger?

Attach closet rod support brackets at various points along the closet rod. Use a stud finder to locate the studs in either the wall or ceiling. Drill pilot holes, using a drill and drill bit. Alternatively, use self-tapping wood screws and mount the bracket directly into the stud.

Is a wood or metal closet rod better?

All closet rods for custom closet organizers are made of sturdy metal rather than wood or wire that is coated in various finishes. The higher quality metal rods hold a lot of weight and won’t sag. … When you are building a large custom closet and need a lot of hanging space, this is the option many will turn to.

How long can closet rods go without support?

You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

Can a closet be 20 inches deep?

The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.

How deep should closet rod be?

Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.

What diameter is closet rod?

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported. These dowels are most often hung between two round wall brackets secured to the wall with screws and drywall anchors.

How much weight does a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

How do you install a closet rod in drywall?

1. Measure the size of the space where the closet rod will go.
2. Buy a closet dowel rod and cut it to length.
3. Choose a wall bracket that can be positioned so that you can screw it into wall studs.
4. Mark the place where your first bracket will be installed.
5. Drill pilot holes.

Article first time published on

What is the rod in the closet called?

Some people call it a valet rod, others call it a valet pole. We think every clothes closet should have at least one. … When it comes to closets, a valet rod is also essential. You just might not know it yet.

How deep is an average closet?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing.

How do you hang a closet rod from the ceiling?

Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.

Do closet rods need studs?

Installing a closet rod in a closet without conveniently located studs is a simple job that requires no special tools or advanced carpentry skills. Closet rods are typically held by flange-type sockets that are attached to the wall, screwed into framing studs.

Do closet rods need to go into studs?

Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.

Do closet walls have studs?

Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. … If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.

How thick should closet shelves be?

The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.

How wide is a hanger in inches?

Standard-sized adult hangers measure 17-18 inches. Our over-sized hangers measure 19″ wide, giving more support to heavy coats or larger jackets.

How deep are shelves in a closet?

Most typical closet shelving is 14” deep, partly because that depth works well for most folded clothing but also because that dimension provides excellent yield from the typical sizes of materials that are available to closet manufacturers, which minimizes waste.

Can you use a tension rod to hang clothes?

Tension rods can be used for more than just holding up curtains, though that is what most people think to use them for. They can also be used for clothes. … It’s also a good option for hanging freshly ironed clothing. A heavy-duty aluminum rod is great for heavier curtains and a great option for closets.

Can a closet be 19 deep?

Minimum reach-in bedroom or reach-in coat closet: 22″D (standard reach-in closet depth is 24″) x any width. Minimum reach-in pantry or linen closet: 17″D x 19-3/4″W (standard closet shelves come in 12″, 14″ and 16″ depths).

How deep are closet drawers?

Standard closet organizer sections allow for widths of 18-inches, 24-inches, and 30-inches. Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face.

What is the minimum size of a closet in a bedroom?

A bedroom walk-in closet size must have a depth of at least 36-48 inches. The bedroom closet’s width is practically half the room’s width. Moreover, a standard 12 x 12 bedroom can customarily accommodate a closet with a depth of 48 inches and a width of 6 feet.

How much weight can Rubbermaid shelving hold?

Total Weight Capacity: 350 lbs.

How long can a clothes rod be?

Stacking Closet Rods Typically, this arrangement is used along with shelves stacked in the space beside the rods. Double rods are usually 34 to 48 inches long but may be up to 10 or 12 feet long. The rods stack at a height of 80 and 40 inches along the back wall, providing space to hang shirts and pants comfortably.

How much weight can closet shelves hold?

Rely on the strength of steel. The most versatile shelving system in the world won’t do any good if it can’t support much weight. Typically, wire shelving maxes out at around 80 pounds.

How wide is a standard closet?

Usually anywhere from 3 to 8 feet wide with a limited depth of 24 to 30 inches, reach-in closets are commonly found in hallways, kids’ rooms and bedrooms of older homes.

What is the strongest drywall anchor?

Traditional metal toggle bolts are the strongest of the bunch, but they’re not the simplest to install because they require drilling a hole that’s approximately three times wider than the diameter of the bolt (necessary to insert the anchor).

How do you hang a closet rod in plaster?

Drill a hole through the plaster wall, insert the toggle bolt through the rod holder, press the toggle through the drilled hole and tighten it down with a screwdriver. Hang the dowel rod on the closet rod holders.