How much turface do I need

With most infield mixes, the recommendation for Turface® incorporation is about one ton (roughly 40 bags) of product per 1,000 square feet of skinned area. This results in approximately 10 tons of Turface for a high school, college or professional field with 90 foot baselines and grass infield.

How much does Quick Dry cost?

Size / DescriptionQtybag (50 lbs) $43.68 This item has been discontinued by the manufacturer.Out of Stock

How much is a turface MVP?

For a partial renovation, applying 750 pounds per 1,000 square feet is recommended. Nail-dragging Turface MVP into the top 1.5 inches of the soil will allow for good moisture management and compaction resistance. For a full renovation, approximately eight tons (or 320 50-pound bags) should be added to the infield skin.

What can I use instead of turface?

• A constant ¼ inch size versus turface, which is made up of smaller particles. that reduce drainage.
• Less water retention. Our tests show a 20 percent water retention rate for. …
• Better cosmetics. …
• High firing temperatures. …
• BonsaiBlock has a consistent PH range.

Can you put turface on grass?

Turface MVP not only has benefits for sports fields but also works great for lawns, gardens and flower beds by tilling it into the soil. Turface MVP sports field conditioner has the unique ability to absorb its own weight in water and slowly release this moisture over and over again.

Can you use Quick Dry on grass?

Widely used and recommended by professional grounds keepers and curators. Designed for use in a multitude of ways, Turface Quick Dry can be used to build, maintain, repair infields, turfs and large playgrounds. As the name suggests, Turface Quick Dry is the solution for when your turf is partially or completely flooded.

What is turface made of?

Ingredients: Small Fir Bark, Turface Calcined Clay, Crushed Rock.

How do you dry a diamond?

Diamond dry is not a replacement for dirt. Once the proper amount of Diamond dry is spread, you work the diamond dry into the dirt lightly with a rake. The diamond dry will take 15 minutes to work, after it is raked into the dirt. Once absorbed, you will need to rake again after the 15 minute point.

What is turface MVP?

Product Overview. Turface Athletics MVP is an infield conditioner composed of large particles that you can use as a topdressing to help create an excellent and level playing surface. This also helps improve native soil for turf renovations, as well as prevent rain outs.

Is turface good for bonsai?

Turface can be used as a top dressing to help improve water and air circulation. Turface resembles crushed terracotta pots, looks great as a top dressing. High fired calcined clay perfect for Bonsai soil mixes.

Article first time published on

Is turface good for plants?

Turface is a high-fired clay that helps to retain moisture without reducing drainage, prevents compaction, provides more porosity and reduces leaching of nutrients from the soil. For plants that grow well in a more organic soil, such as most woodland plants, use the lower percent of Turface.

What is turface soil conditioner?

Turface is a soil conditioner. It is a calcine clay product used to improve drainage, reduce compaction, hold moisture, improve the CEC of the soil. The clay is mined in MS, then run through an oven at 1500 degrees.

How do you apply turface?

STEP 1: Lightly moisten the skinned area to loosen the surface in preparation for mixing the Turface MVP into the soil. Do not soak. STEP 2: Spread 2-3 tons of Turface MVP evenly over the infield. STEP 3: Nail drag the infield twice, working the Turface MVP into the top 1-1.5″ of the playing surface.

What is calcined clay used for?

On baseball fields calcined clay is used to fill in infield depressions caused by cleats and smooth the surface to provide a true baseball bounce, which contributes to the safety of the field. Calcined clay absorbs water that can help dry a field after a rainstorm, and firm the surface.

How much dirt do I need for a baseball field?

Area of Skinned InfieldDirt Needed for 1″ Depth70′ Bases Grass Infield6,800 sq ft21 yds70′ Bases Skinned Infield10,700 sq ft33 yds60′ Bases Grass Infield3,850 sq ft12 yds60′ Bases Skinned Infield6,700 sq ft21 yds

Is turface safe?

Turface is stable under all normal conditions.

Does turface break down?

Turface, whether wet or dry, will not compact, cake or break down to smaller particles. This is because Turface particles are angular, not flat, round or square.

What is Quick Dry for baseball fields?

Stay in the game with Rapid Dry drying agent. These sand-like granules are designed to quickly wick away excess water from your infield, keeping your games playing safely and without delay.

What is the pH of turface?

Essentially, Turface can be at 4.0 pH, and plants, BROADLY speaking, need growing mediums between 5.5 and 6.5.

How do you make ALS gritty mix?

The basic mix is 1:1:1, pine bark fines:Turface:crushed granite. This is what I grow all my woody plants in that go 2-3 years between repots and I usually keep it that simple (1:1:1).

What is expanded shale?

Expanded shale is formed when the shale is crushed and fired in a rotary kiln at 2,000 F. … Expanded shale also holds 40% of its weight in water, allowing for better water retention around plants. Unlike organic amendments, expanded shale doesn’t break down so soil stays loose and friable for years.

How do you drain a soggy lawn?

1. Aeration. Aerating the lawn will help to improve drainage and will add air into the soil which will improve the conditions for the grass roots to live in. …
2. Moss Killer & Fertiliser. …
3. Dig A French Drain. …
4. Choose Permeable Paths & Patios. …
5. Dig A Ditch. …
6. Plant A Bog Garden. …
7. Over-Seeding. …
8. Collect Rainwater.

Why is my grass always wet?

​Lawns can become moist over prolonged periods of time for many reasons. Some of those reasons include problems such as one’s lawn not receiving enough sun, grading problems, and improper filtration.

How do I stop standing water in my yard?

In order to make your lawn more amenable to water absorption, work organic matter into your soil. Garden compost, leaf mold and manure will all open the soil up and create more minute channels through which water can escape. Dig. For hardpan problems, a shovel may be the best solution.

How much does a yard of infield mix weigh?

The clay weighs approximately 2500 lbs per yard.

What is soil conditioner used for?

Soil conditioners, also referred to as soil amendments, help improve soil structure by increasing aeration, water holding capacity, and nutrients. They help break up compacted clay soils, which lack sufficient space for air and water, both of which are important for microorganisms to thrive and for plant roots to grow.

What is Diamond Dry made of?

From Rainfall to Play Ball Diamond-Dry is an all natural, biodegradable, and renewal product made from corn cobs with no chemicals, coloring, or other additives, Diamond-Dry does an exceptional job of absorbing water on baseball / softball fields. Just apply to the wet areas and rake into the wet soil.

Does turface absorb water?

Turface boasts 74% internal porosity and can absorb its weight in water. When Turface particles are exposed to water, the moisture is absorbed into the internal storage sites. … Turface helps keep the moisture level at just the right amount, and for a longer period of time than other mixes.

What can I use instead of akadama?

Akadama is a bit costly, so it is sometimes substituted with fired/baked clays that are more readily available at garden centers. Even kitty litter is sometimes used in lieu of akadama. Pumice is a soft volcanic product that absorbs both water and nutrients well.

Can you reuse bonsai soil?

You spend money to gather these prime sized particles and you should reuse them. These rocks have been around for thousands of years and are absolutely re-useable. Almost every aggregate can be separated from a used bonsai mix.

How do you apply pumice to plants?

Using Pumice as a Soil Amendment For plants that are prone to rotting, like some euphorbias, amend the soil with 50% pumice, or in lieu of amending the soil, fill the planting hole with pumice so the roots are surrounded by it. Pumice can be used as a topdressing to absorb rainwater that puddles around plants.