How much do a toilet cost

Average Cost$500High Cost$1,500Low Cost$90

What is the best toilet for the price?

Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet. Best Value Two-Piece Toilet: Delta Foundations 2-piece Toilet. Best Feature-Rich Toilet: American Standard Cadet Touchless Toilet. Best High-Efficiency Toilet: American Standard Vormax Ultra High Efficiency Toilet.

Do Home Depot toilets come with everything?

The all-in-one product features the toilet bowl, toilet tank and seat along with a wax ring and floor bolts with caps. Remember that most toilets do not come with the toilet seat included. They must be purchased separately.

How much does a one piece toilet cost?

In general, one-piece toilets range from $400 – $1,200, while a two-piece toilet might range from $150 to $600. Installation for each toilet costs around $100. So, a one-piece toilet will cost between $500 and $1,300 with installation while the two-piece costs between $250 and $700.

How much does a new toilet cost installed?

On average, a standard toilet installation costs between $120 and $230 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $221 to $427.

Does it matter what size toilet I buy?

Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. … If the base of the new toilet is shorter than the distance between the rear bolt holes and the wall, it should fit.

How often should you replace your toilets?

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

What is better a one piece toilet or two?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

What is better elongated or round toilet?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Do toilets need to be replaced?

Do you know how old your toilet is? Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced.

Article first time published on

What should I look for when buying a new toilet?

While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.

How long does it take to install a toilet?

Installing a toilet takes between 1 hour and 4 hours depending on the level of experience and type of toilet you’re planning to install. Once your toilet installation is complete, you’ll want to fit a toilet seat.

Can I install toilet myself?

All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet and, if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.

How much does it cost to remove and install a new toilet?

A plumber charges around $375 to replace a toilet. Most charge between $275 and $480. This includes the cost of removing and disposing of your old toilet. Note that the actual cost to replace a toilet depends on your location, the type of toilet and the difficulty of the installation.

Is it hard to install new toilet?

Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. … Then remove the tank cover, flush the toilet and sponge the tank dry. Use a plumber`s plunger to force as much water as possible out of the bowl.

Why do Toilets clog so easily?

Excess waste and toilet paper or non-flushable items can become lodged in the toilet trap after they are flushed. When there is a significant mass stuck in the toilet trap, the toilet keeps clogging as normally flushed material is more likely to catch and clog.

Why do toilets crack?

A toilet is a sensitive piece of equipment. It is made of porcelain and can crack or break very easily, and simple repairs are often the cause of a cracked toilet. For example, fixing a broken component inside the tank and putting the lid back on the tank too hard can cause the toilet to crack around its top.

How long after installation can a toilet be used?

The best person to ask is whoever installed it. Most people ask how soon they can use it, not how long! It can be used as soon as the water supply is turned on. Toilets are bolted to the floor flange, so there is nothing to dry or cure.

How do I know if my toilet is a 10 or 12 rough?

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.

What are the three types of toilet?

• Wall Hung toilets.
• Close Coupled toilets.
• Back To Wall toilets.

Can you replace a round toilet with an elongated toilet?

It’s a good thing that almost all toilets have 12-inch rough-in. Hence, it’s possible to put an elongated seat on a round toilet. You can still do it even when there’s a larger rough-in. However, plumbing configuration or moving the wall to give some more space to the toilet is required.

Which toilet height is best?

Toilet Height Whether it’s marketed as “chair height,” “comfort height,” or “tall height,” the best toilets to buy for your bathroom should have a rim height that makes it easy to sit down and stand up. Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people.

How do I choose a toilet bowl?

Feel if the bowl shape and size is right. There are elongated toilet bowls that allow you to rest your thighs while sitting down. However, if you are struggling with a tight bathroom, a compact-size toilet bowl might be a better choice. When choosing a toilet bowl, also make sure the design is easy to clean.

Are chair height toilets better?

It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Are Kohler or American Standard toilets better?

The numbers show that if you’re on a budget, you can opt for American Standard. Although the price of the Kohler for a slightly comfortable toilet is a bit high, the American Standard at a reasonable price assures durability. All in all, these two brands are much better than other toilet brands.

What is comfort height toilet?

Traditional toilets are 15 inches high. … Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.

How long will a toilet last?

Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.

How do I know if my toilet is bad?

1. Clogs and Overflows. …
2. Constant Running. …
3. Poor Flush (or the Dreaded No Flush) …
4. Leaks. …
5. Hissing or Trickling Sounds in the Tank.

Can a toilet be defective?

Constantly running – If your toilet is constantly filling with water or if it needs to fill with water even though you haven’t flushed it, you likely have a problem. This usually is the result of a defective flapper (yes, that’s the actual name of it). … It seals the base of the toilet to the large drain pipe below it.

Why are some toilets more expensive?

Toilet design is the main factor in determining why some toilets cost more than others. Generally speaking, one-piece, wall hung toilets tend to be more expensive than alternative styles. They incorporate a slick, sleeker appearance than their counterparts, and feature less crevices which makes them easier to clean.