How long are roller blinds

Standard sized blinds are anywhere from 24 x 72 – 72 x 72 off the shelf at your local hardware stores.

How long should a roller blind be?

Ideal Length for Exact-Fit Blinds Measure from one side of the window to the other and then add 50mm to each side. This makes the blind wider and longer than the window, which helps you ensure the window is covered, reducing the chance of sunlight leaking through around the edges.

How long can a roller shade be?

Roller and Solar shade maximum sizes vary from 80 to 120” in width and about 100-144” in height (depending on fabrics and options chosen).

What are standard roller blind sizes?

Standard sizes are 18mm, 25mm, 28mm, 32mm and 40mm. There is a 38mm (Inside diameter of the tube) system which is the same as a 40mm tube.

Does it matter if roller blinds are too long?

Roller blinds that are too long don’t make for a very pleasant or neat look and may ruin the aesthetics of the room and the window frame. The blinds that are too long also increase the safety risk, especially if you have kids or pets in the house. Long roller blinds are easier to reach for the kids and pets alike.

How do you measure roller blinds UK?

1. Starting at the top, measure across the width of the window. …
2. Then measure across the middle and the bottom of the window, adding 120mm to each figure. …
3. Once you have your width, measure from the top of where your fitting will sit, to where you want it to drop.

How do you calculate blind size?

Measure from top (where you want the rail to be) to bottom (where you want the bottom of your blind to finish). We recommend to start your measurement at least 15cm above the recess and finish at least 15cm below the window sill to prevent light bleed. Measure 3 equal points across the window and note the longest size.

Are roller blinds easy to size?

Roller blinds are simple and easy to cut to size yourself. You simply need to take the measurements of your windows, compare them against your blinds and cut off the excess material. You Will Need: A pair of sharp scissors.

Can all roller blinds be cut to size?

You can usually buy roller blinds in different sizes. If you’re lucky, you’ll be able to find one that fits your window perfectly. … Choose a blind that’s slightly longer and wider than the window frame. You can cut the top roller of the blind to the right size with a hacksaw.

What is the longest roller blind you can have?

Most large roller blind systems such as the ShadeTech RBXL range allow a maximum roll-up diameter of 110mm, this allows for an approximate drop of 6m based on using a screen fabric with a thickness of 0.6mm.

Article first time published on

How wide do roller blinds come?

The maximum fabric width most roller blind fabrics come in is 3000mm. (3 metres), So something like a standard sliding door is no problem for a roller blind to fit along the top. There is a new range of roller blind fabric that now spans 3200mm wide.

How wide are roller shades?

Roller shades are found in width ranging between 80” and 144”. For most windows the maximum width of 144” is sufficient.

How much longer should blinds be than the window?

Lastly, to make sure of the light control as well as privacy, the blinds should be at least three inches broader than the window casing, so that it overlaps the window by 1 and a half inches on each side.

Can blinds be cut to length?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

Do blinds have to be exact length?

Measuring The Size You Want Your Blinds To Be, Not the Size Of The Window Opening. When you order inside mount window coverings from Blinds.com, we always ask for the EXACT size of the window opening, edge to edge.

How much smaller should blinds be than the window?

Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?

How much smaller should blinds be than the window for inside mount?

Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.

What is the depth of a roller blind?

Roller blind depth Minimum width of 13 ¾ inches or 350 mm (35 cm) Minimum drop of 13 ¾ inches or 350 mm (35 cm) Minimum inside mount depth (recessed) of 3 inches or 74 mm (7.4 cm)

How do you cut roller blinds without fraying?

Use scissors to remove any frayed material or loose strings that you see on the edge that you cut. If you need to make additional cuts or trims, use the same straight edge and knife that you used the first time.

Can IKEA Roller Blinds be cut to size?

The furniture store Ikea sells blackout roller blinds that you can cut to fit in your window. To get the proper width, you’ll need to trim both the roller and the fabric of the blinds themselves. … Measure your window twice before cutting so your blinds don’t turn out too narrow or too large.

Can you make blinds smaller?

You can cut an even amount off of each side of the headrail or if it is a small amount, just cut it off of the lift cord side of the headrail. Remove the end stiffener from the headrail. With the tin snips or hacksaw, carefully cut the headrail along the mark you made.

Can you put a roller blind over vertical blinds?

Most blinds, including roller blinds, can be fitted either within the recess or outside of the recess. To make your double-blind set up work, you’ll want to order one to fit inside and one to sit outside. This allows each one to have the space it needs to work and minimises the risk of damaging collisions.

How wide can electric blinds be?

Up to 3m wide on a 45mm roller tube. 3.5m on a heavy duty 45mm tube.

How wide can wooden blinds be?

Normally the maximum width of a wooden blind can be made to fit is around 242cm as any more and the weight of the blind will be too heavy to fully open or close the blind or actually fit safely to your window frame.

Can blinds be shorter than window?

The gap on either side of the blind will vary depending on the type of blind or shade, but most blinds are cut to be 1/2 inch smaller than the smallest width of the window.

How long is a window shade?

If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.

Are roller shades out of style?

For a more modern look, try Roller Shades or Sheer Shades. Faux wood blinds are a standard in many homes for a reason. They work with nearly any decor style and will never go out of fashion. … Fabric roller shades are one of the most affordable window covering options and give windows a clean look.

Should blinds be flush with wall?

1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.