How do you use a silky saw

Silky Saw blades have a well-deserved reputation for being very sharp, and it’s true, they go through wood like butter. Made in Japan, the blade cuts on the pull stroke, not on the push, which requires less energy to saw and gives you more control over the blade.

Are Silky saws any good?

Silky Saw blades have a well-deserved reputation for being very sharp, and it’s true, they go through wood like butter. Made in Japan, the blade cuts on the pull stroke, not on the push, which requires less energy to saw and gives you more control over the blade.

Can you sharpen a silky saw?

Silky saws with not induction hardened teeth can be sharpened with the Silky file. … We recommend professional users to start filing the teeth at the surfaces then finish with the top surface For normal use, it’s su icient to only sharpen the top surface File along the angle a few times for optimal results.

Are Silky saws pull saws?

But did you then also know that Silky Saws are pull saws and only cut as you pull the blade towards you.

Why are Silky saws so expensive?

Silky hand saws are more expensive than wooden-handled traditional saws, yet professional arborists and tree-workers realize that the added cutting speed, durability, and longevity of the blade make the saw more than worth the price.

What is a silky cut?

Silk Cut is a British brand of cigarettes, currently owned and manufactured by Gallaher Group, a division of Japan Tobacco. … The packaging is characterised by a distinctive stark white packet with the brand name in a purple, blue, red, silver, white or green square.

Which silky saw is best?

Best all-purpose Silky saw The best silky folding saw for the widest range of tasks is the Silky Bigboy with medium teeth. With a blade length of 360mm it’s a pretty standard full sized blade that can easily deal with the small stuff but also able to saw through 12inch logs with surprising ease.

How do you maintain a folding saw?

Keep It Dry. Store your saw in a dry place or a toolbox to prevent rust.
Lubricate The Blade. After each use, lubricate your blade with gun oil, paste wax, or WD-40 before storing. …
Oil The Handle. …
Remove Blade Rust With a Razor. …
Sharpen The Saw.

Where is silky saw made?

Silky saws are manufactured in Ono Japan, home of the finest cutlery steel known to man.

How do you sharpen a Japanese pull saw?

To sharpen with a feather file, clamp your saw in a vise with the teeth just above the jaws. Because these teeth are sharpened in an alternating left-right pattern, you’ll sharpen every other tooth from one side, then flip the saw around and sharpen the remaining teeth.

Article first time published on

How far does a pole saw extend?

They can be powered by you, or with an engine running on gas or electricity. The electrical ones can be corded, or battery powered. Most pole saws extend from 6 to 20 feet. Manual pole saws have a slightly curved, serrated hacksaw blade.

What is longest electric pole saw?

The Husqvarna 327PT5S is the longest reaching pole saw on the market, along with being the most powerful.

How do you cut high branches?

2.1. Use a Pole Pruner. …
2.2. Use a Pole Saw. …
2.3. Use a Pocket Saw with a Rope. …
2.4. Use a Ladder with a Pruner or Pruning Saw. …
2.5. Rent a Bucket Lift. …
2.6. Climb the Tree Using Ropes and Harness. …
2.7. Use a Phone to Call a Professional.

Are folding saw good?

A folding saw is one of the most practical multipurpose tools you can bring into the bush. It can be used to clear brush, build a shelter, saw through bone, or cut wood to size for a stove (to name just a few uses). Because of how many uses a folding saw has, I recommend it over other tools like a survival axe.

What is a pruning saw?

Definition of pruning saw : a saw that has a usually tapering straight or curved blade and either a closed or an open and sometimes folding handhold and that may or may not be attached to a pole.

Are all Silky saws made in Japan?

Today, Silky saws are manufactured in Ono, Japan, home of the finest cutlery steel known to man. Crafting fine wood cutting saws since the early 1900’s, Silky continues to raise the bar for quality, endurance and cutting efficiency that none can match.

Are Silky saw blades interchangeable?

The special alloys used, the metalworking knowledge and the technical aspects of the different type of teeth configurations stand for a unique quality. The saw blades of Silky saws are made from Authentic Premium Japanese Steel and cut out by laser. … All saw blades are replaceable and the replacing itself is simple.

How do you clean pruning saw blades?

Simply spray 91% Isopropyl Rubbing Alcohol on the blade of hand pruners, loppers, and saws. Wait 20 seconds, then, wipe off. This not only kills fungi and bacteria, but also removes tree and plant sap.

What is impulse hardening?

Impulse hardening is a method of providing an incredibly strong, hard edge. The process involves both a heating and cooling at very precise time intervals (within thousandths of a second) using impact energy created by high frequency currents.

Do you need to oil a hand saw?

The handle of the saw needs frequent lubrication, especially if it is made of wood. You can do this with a little boiled linseed oil to prevent moisture and dirt from accumulating. In addition, if the parts connected to the blade show signs of rust, be sure to remove the handle and clean the groove.

What is the important lesson given by a saw blade has width?

The width of the “kerf” – the slot the blade cuts in the material – is another important consideration. Most obviously, the kerf width determines the amount of material that is expended in the cutting process.

How do you store a hand saw?

Saws should be stored only by hanging them from their handles (centering their chi with the molten core of the earth) or by storing them on their teeth as long as they are fully supported.

What is a cant file?

Cant files are specifically designed for sharpening large teeth like those on our one- and two-man log saws. The triangular cross-section and wide surface area aid greatly in shaping and pointing dull saw teeth.

How does a honing rod work?

It’s a kitchen tool that looks a bit like a less-menacing sword. Mounted on the handle is a rounded stick-like rod—typically made from steel, ceramic, or diamond-coated steel. They’re commonly used to straighten the edge of a knife as it’s gently dragged along the rod from heel to tip in a downward slicing motion.

Can Japanese pull saws be sharpened?

Japanese pull saws. … Unlike a western saw, the teeth of a Japanese saw are hardened, meaning that they can’t they can’t be sharpened with a regular steel file and can’t be remade completely, and you can’t buy really miniature sharpening stones that will fit between the tiny teeth of the saw.