How do you make epoxy cups

Stainless Steel Tumbler (I used a 20oz)Spray Paint.Painters Tape.Mod Podge.Silicone Brushes.Fine Glitter.Clear Coat Spray.Epoxy (Both A and B parts)

What is needed to make epoxy cups?

1. Stainless Steel Tumbler (I used a 20oz)
2. Spray Paint.
3. Painters Tape.
4. Mod Podge.
5. Silicone Brushes.
6. Fine Glitter.
7. Clear Coat Spray.
8. Epoxy (Both A and B parts)

What kind of cups can you epoxy?

The stainless-steel tumbler remains the best option when it comes to using epoxy. The resin tends to adhere to the surface well and it does not need a coat of spray paint like other materials. To enhance your color, you can add a paint base coat.

How do I start making epoxy tumblers?

1. Wash tumbler.
2. Apply tape to top (and bottom – optional).
3. Spray paint the tumbler if needed. Let dry.
4. Apply a layer of mod podge with long even strokes.
5. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. …
6. Remove tape.
7. Let dry fully (over night). …
8. Time to epoxy.

What do I need to make custom tumblers?

1. ArtResin epoxy resin.
2. an insulated tumbler ( stainless steel is best as epoxy resin doesn’t adhere to plastic )
3. painter’s tape.
4. spray paint.
5. craft materials of your choice to decorate your tumbler: glitter & spray adhesive, alcohol ink & sponges, ResinTint liquid colorant.
6. nitrile gloves.

What is the difference between resin and epoxy?

The most obvious difference between the two is the intended use. Epoxy resins are meant for coating applications whereas casting resins are meant for casting applications such as molds, figurines, & jewelry. However, that is not to say that either would not work for their opposite intended uses, but more on that later.

How many layers of epoxy do you need for a tumbler?

It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.

Can you drink out of an epoxy Cup?

ArtResin is NOT edible or potable in either liquid or cured form. The maximum temperature cured ArtResin can come in contact with is 120F or 50C. … Since hot food may exceed these temperatures, placing it on a resined surface should be avoided.

Can you epoxy acrylic tumblers?

It is possible to put epoxy over plastic as long as it is not #5PP. Epoxy will not stick to this specific type of plastic. … Plastic was not made to be smothered by a chemical, but it can be done. If you’re looking for a cheaper alternative try using acrylic tumblers.

Can you use resin on tumblers?

Resin Art has always found a special place in the hearts of artists. With Epoxy Resin, you can create your personalized tumbler. Depending on your own choices, you can the customize the epoxy tumbler your own by using colors, glitter and other materials.

Article first time published on

What kind of vinyl is used for tumblers?

Permanent vinyl is the best kind of vinyl to use for tumbler cups. Cricut Permanent vinyl will last really well. You can put this vinyl through the dishwasher but stainless steel tumblers hold up better if you hand-wash them.

Is there a substitute for epoxy?

Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.

Can I use Mod Podge instead of epoxy?

You can use Mod Podge like epoxy resins to seal art work, paint, wood, glass, and various other surfaces without any major issues provided the surfaces are kept indoors or out of wind and rain. … If you are just looking for a sealing agent though, Mod Podge can hold its own with epoxy in most situations.

Can Mod Podge be used as epoxy?

Paper Mod Podge does all that wonders for you. … It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.

How long do you let epoxy dry on Tumblr?

Wait until the epoxy is completely cured (approx. ~ 24 hours). Wash the tumbler with soap and water and it’s ready to use!

Can you make cups with a Cricut?

Prepare your mug collection, because the latest product from Cricut will make you want to give your coffee cups a makeover. Cricut’s new Mug Press is a heat press that works with Cricut’s Infusible Ink to transfer custom designs onto special polyurethane-coated mugs.

Can Cricut glitter vinyl be used on tumblers?

There are several different types of permanent adhesive vinyl including patterned, glitter, glossy, matte, and more. You can apply any of them to a tumbler or mug, but keep in mind none of them are dishwasher safe.

What is epoxy resin made of?

Epoxy resins are produced industrially from raw materials that are for the most part derived from petroleum. An epoxy resin is a polyepoxide comprised of reactive prepolymers and polymers that contain epoxide groups. Epoxide groups are commonly known as epoxy which is known as a strong adhesive.

Can I mix glitter in resin?

If you want your glitter to be evenly mixed throughout the resin, you need to not use a “heavy” glitter. Instead opt for a fine, micro-glitter like Stampendous micro-glitter or something similar. Many experienced crafters also recommend that you wait before adding glitter to the resin.

Is polyurethane same as epoxy?

Generally, a polyurethane floor coating is highly flexible and elastic, while epoxy flooring is harder and more brittle. This makes polyurethane coatings more resistant to scratches and similar damage and is why you’ll often find urethane resin floors in heavy traffic areas – such as multi-storey car parks.

Can you use epoxy on Starbucks cups?

Unlike epoxy, the Crystalac cures by evaporation so there is no chemical reaction between the plastic and the Crystalac which is a major reason why people advise not to put epoxy on your Starbucks Cups! … Using Brite Tone is recommended on plastic surfaces and you always want to make sure your cup is properly prepped!

Can you mix resin in plastic cups?

To waste as few as possible epoxy resin, I used very small plastic cups for dipping. The exact material of this plastic cups is very important I learned. You should never use something which will react violently with the mixed epoxy resin, as you can see in the next picture.

Is epoxy cancerous?

Tests on laboratory animals showed that older epoxy resins caused skin cancer. It is, most likely, due to epichlorohydrin, which probably causes cancer in humans as well. However, newer epoxy resins contain less epichlorohydrin, so they don’t cause cancer in animals.

Can you microwave epoxy?

The thing is that properly cured epoxy resin is considered microwave-safe. Tests done to it alone yields that it doesn’t heat up when exposed to microwave rays. … Even if it’s broken ceramic, which is known for its microwaveable properties, you shouldn’t microwave it along with epoxy despite both being microwave-safe.