How do you apply blue skin

Prime surfaces with Henry Blueskin® Adhesive, Henry Blueskin® LVC or Henry Aquatac™ Primer as per Technical Data & MSD Sheets and allow to dry, press membrane firmly into place, overlap minimum 2” inches (5cm) at side laps and end laps. Promptly roll all laps and membrane to ensure the seal.

How can I apply for blueskin in South Africa?

Does blueskin stick to itself?

Self-Adhesive Air and Vapor Barrier Membrane Blueskin® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.

Does blue skin require primer?

board, DensGlass Gold® and metal surfaces. Blueskin® Primer is the primer of choice on above grade applications of self-adhered membranes where a quick setting, aggressive tack, solvent based primer is required. Blueskin® Primer Ultra is ideal where a very fast drying primer is required.

Does blueskin stick to concrete?

Features: SBS modified membrane can be applied in temperatures as low as -12ºC. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood. Impermeable to air, moisture vapor and water.

What temperature can you apply blueskin?

Protect from weather or store in an enclosed area not subject to heat over 120 °F (49 °C). In cold weather, it is recommended to warm rolls to 50 °F (10 °C) or above prior to application to assure adhesion to substrate.

Is the blueskin breathable?

Blueskin VP™ is a fully integrated, self-adhered, vapor permeable air and water barrier membrane. This innovative product provides a method to completely seal the building enclosure to control air leakage while maintaining a continuous drainage plane with excellent breathability.

How do you remove blue skin primer?

The stripper will have hardened, so you can work in any order you’d like. …
You may need to use a wire brush after you scrape porous surfaces, like brick or concrete.
This can take a while if you’re removing primer from a larger surface area.

Can you use blueskin on a roof?

Blueskin® PE200HT is specifically designed to provide an exceptionally high temperature and performance roofing underlayment. It is designed to be adhered directly to roof decks or certain insulation panels prior to the application of finished roof coverings including architectural metal, shingles or tile.

How long can blueskin be exposed?

Limitations: Blueskin® SA is designed for exposure up to 90 days if necessary to accommodate construction scheduling, but is not designed for permanent exposure to ultraviolet light and should be covered as soon as practical after application.

Article first time published on

How long is a roll of blue skin?

36″ x 50′ Roll Weather Barrier.

How many square feet is a blueskin roll?

4-ft x 100-ft. 400 Sq Ft.

What is blue skin tape?

Blueskin® Butyl Flash is a self-adhered flashing consisting of a synthetic butyl compound which is integrally laminated to a white engineered polypropylene film surface. The flashing is specifically designed to be self-adhered to a prepared substrate.

Can you use blueskin on foundation?

Repair any damage to foundation and apply two coats of parging. Add a footing bevel where the foundation wall meets footing. Apply AquaBloc primer and apply BlueSkin waterproof membrane. … Backfill and grade property away from foundation.

Is blue skin waterproof?

Blueskin® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.

Can you put blueskin on wood?

Acceptable substrates are precast concrete, cast-in-place concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and wood.

Is blueskin an air barrier?

Henry® Blueskin® SA is a self-adhered water resistant air barrier consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film surface. Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.

Does blue skin have an R value?

Also, Blueskin® VP100 is self-adhered, allowing it to bridge the gaps of the sheathing. … Blueskin® VP100 will help a home’s insulation perform at its intended R-Value while contributing to reduced energy costs and eliminating uncomfortable air drafts.

Which house wrap is best?

Originally, asphalt-laden felt paper was thought to be the best type of house wrap on the market. In fact, it’s still available, along with other house wrap solutions. However, Dupont’s Tyvek HomeWrap® is considered by most in the building profession to be the industry leader.

Can you apply blueskin in cold weather?

Blueskin® Primer is the preferred primer in the industry for self-adhered membranes. … This membrane is designed for cold weather applications, which can be applied down to temperatures of -12°C!

How long can vp100 be exposed?

Maximum exposure not to exceed 150 days. Excessive moisture in substrate or laps can inhibit adhesion or result in loss of adhesion prior to installation of cladding.

Is blueskin heat resistant?

Store rolls on end in original pallets or elevated platform. Protect from weather or store in a dry enclosed area not subject to heat over 120 °F.

What is high temperature underlayment?

This self-adhering “self-stick” roofing underlayment is composed of a cool white, non-slip, cross-laminated, high density polyethylene film laminated to a high temperature rubberized asphalt adhesive system. …

What is high temp ice and water shield?

Ice & Water Shield® HT is formulated with a proprietary adhesive with temperature resistance of up to 260°F. The membrane forms a watertight bond to the roof deck, and seals around fasteners of the primary roof covering and thus maintains the waterproof integrity of the roof deck.

How do you get rid of blue skin?

Response: In case of fire, use alcohol foam, carbon dioxide (CO2), or dry chemical to extinguish. IF ON SKIN: Take off immediately all contaminated clothing. Wash with plenty of soap and water.

How do you get paint primer off your skin?

Simply squirt a small amount of baby oil onto the palm of your hand. Then rub and massage it across the areas covered in primer. After around 30 seconds, try washing the oil off. The baby oil should have dislodged a lot of the primer.

Does paint thinner remove primer?

To remove oil based paints primer, use either mineral spirits, paint thinner, acetone, or paint stripper. Go for odourless mineral spirits if you want to remove fresh oil based paint primer. However, for a large paint job, try using heavier duty noxious chemicals like acetone or paint stripper.

Can blueskin be used indoors?

WP200 is an ideal membrane for use in interior applications such as mechanical rooms, laboratories and wet-rooms. … WP200 must be clean of oil, dust and excess mortar.

What is blue skin used for?

Blueskin is manufactured to achieve the highest adhesion level possible. When applied properly, it will virtually eliminate drafts and water leaks at critical areas around the exterior of your residential or commercial building.

Who makes blueskin?

Ideal for wood frame construction, Henry® Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.

Where is Henry blueskin manufactured?

MANUFACTURER: HENRY COMPANY Headquartered in El Segundo, California, Henry Company specializes in integrating air/vapor barrier, roofing, and waterproofing systems, with the mission of improving the livability and sustainability of structures for their owners, occupants, and the environment.