How do I reset my AMQ desk

If your issue persists, please contact AMQ Customer Care at [email protected] or (877) 801-0370. Reset the Base by holding the Up and Down arrows together for 5-10 seconds. After the display stops flashing and you hear a beeping sound, the base is reset.

How do I unlock my AMQ standing desk?

Handset Unlock Press and hold the “M” button (about 5 seconds) until the LED display switches from “LOC” to the height number. 2. Release the button. The handset is now unlocked and fully functional.

How do I reset my autonomous desk?

1. Unplug the desk for 20 seconds. Plug it back in. Wait a full 20 seconds.
2. Press the up and down buttons until the desk lowers all the way and beeps or 20 seconds pass.
3. Release both buttons.
4. Press the down buttons until the desk beeps one more time or 20 seconds pass.

How do I reset my air lift desk?

If necessary, follow the above instructions to reset. Press and hold the UP ARROW to lift. Press and hold the DOWN ARROW button to lower. Press and hold the M button + Number button for 1 to 3 seconds until the displayed number starts blinking.

How do you reset a knoll standing desk?

Press the Menu button and then press the Stand/Right Arrow button six times to navigate to the Reset menu.

How do I unlock my uplift desk?

To unlock: Press and hold “M” button until display changes to numeric height setting. NOTE: If a power outage occurs, the program will automatically return to the unlocked setting. Save up to four commonly used desk heights and recall them quickly.

How do I reset my Jarvis standing desk?

1. Press and hold the ▼ icon until your desk reaches its lowest position. Release.
2. Press and hold the ▼ icon until the display reads RESET.
3. Press and hold the ▼ icon again, until your desk lowers slightly then pops back up a bit. The reset is complete.

How do I reset my uplift desk motor?

Quick Reset Instructions Hold the DOWN button again until the desk lowers slightly, then rises slightly, then release the button. If the desk didn’t move try this step again. The movement means the desk reset was successful. Your desk is now reset and ready to use!

How do you unlock a standing desk?

Answer: Loc is not an error, it is a locking mechanism, if you hold S + up arrow for 5 seconds it will lock and nobody can accidentally change its height. To unlock simply hold S+ down arrow for 5 sec.

Why won't my autonomous desk won't go up?

Common Reasons Why Your Standing Desk Won’t Go Up The control box cycle may be out. The power cables used to connect the desk may have not been secured. The legs of the standing desk may be uneven. There could be obstructions in the travel path.

Article first time published on

How do I reset my poppin standing desk?

Press and hold the DOWN arrow key again, while the desk lowers and rises slightly. Release the key. The display readout will revert to the desk height.

How do I reset my Herman Miller desk?

Press and hold the up and down arrows at the same time until you hear one click (10–15 seconds). Once you hear one click, release the buttons. Raise or lower the table to desired height. Press and hold the up and down arrows at the same time until you hear two quiet clicks (10–15 seconds).

How do I contact autonomous?

Please email our customer service team at [email protected] to discuss and obtain our Return Authorization Number.

How do you program a Jarvis desk height?

To calibrate your handset’s height display, lower Jarvis all the way down and then use a tape measure to determine the height from the top of your desktop to the floor. Select the Calibrate height menu option and use the and icons to adjust the height readout to match your previously measured height.

How do you unlock a smart desk?

1. Unplug the SmartDesk from the main power supply and wait for 20 seconds. Plug it back in and wait for another 20 seconds.
2. Press the up and down buttons (at the same time) until the desk lowers all the way down and beeps.
3. Release both buttons.

How do I set the autonomous height of my desk?

1. Adjusting the Height. To make your desk higher and archive the proper height of the standing desk, press the up key until it reaches the desired position. On the opposite, to make your desk lower, press the down key until it reaches the desired position.