Does Bora care treat mold

It acts as a surface protectant, killing all forms of fungi (including mold), while sanitizing and disinfecting the treated area. Bora-Care is the industry’s leading borate-based wood preservative, rendering treated wood impervious to termites and other wood destroying insects, as well as wood decay fungi.

Does Boracare need to be diluted?

I. BORA-CARE® is a concentrate which must be diluted with clean water before use. The use of warm or hot water, if available, and an impeller type mixer which can be used with an electric drill aids the dilution process.

What color is BoraCare?

Great for homes in flood zones. It can be applied to bare wood, plywood, particleboard, oriented strand board (OSB). NOTE: Bora-Care with Mold-Care may come in a blue or green jug. It is the same product, just different container colors.

How do you make Boracare?

1. 1 gallon of pre-diluted Bora Care will treat 800 BF. …
2. 1 gallon glycol (9.3 lbs) + 3.72 lbs Borax, + 2.48 lbs boric acid. …
3. 1 gallon glycol, 4.5 lbs Borax, 3.5 lbs boric acid. …
4. 5 gallons for $100 – It probably weighs about 35 lbs.

What is borate powder?

Summary: Borate (borax) is a mineral salt of boric acid and a very effective insecticide and wood preservative. It can be used as a powder, incorporated into baits, or applied to directly building materials.

Can you use Bora-Care indoors?

BoraCare can be used indoors safely. It is considered a green product and is made from natural products. BoraCare is only meant to be applied on wood.

How long does it take for Bora-Care to dry?

Answer: You should allow areas treated with Bora-Care to dry for 24-48 hours before touching or painting them. Most applicators apply two coats of Bora-Care for best results.

How long does Bora-Care termite treatment last?

How long will Bora-Care® stay in the wood? Since Bora-Care® is derived from minerals, once the active ingredient diffuses into the wood it will remain indefinitely. There are no natural forces that will degrade or break down the product inside the wood.

How long does it take for Bora-Care to work?

Bora-Care will take at least 30 days usually to diffuse through the entire piece of wood. This of course depends on the thickness and moisture content of the wood. It starts to work as soon as it begins to penetrate the wood it is applied to.

Does Bora-Care stop wood rot?

Uses: Bora-Care® prevents and controls termites, insects, and wood decay fungi such as brown and white rot. Use on bare wood that is regularly in contact with water, such as crawl spaces, decks, sills, columns, joists, beams, logs, siding, and fences.

Article first time published on

What does Bora-Care do?

Bora-Care is a low toxicity wood preservative that has a low environmental impact. It protects wood and whole structures from most wood destroying organisms including subterranean termites, Formosan termites, drywood termites, wood destroying beetles, carpenter ants, and decay fungi.

Is Boracare the same as borax?

The active ingredient in Bora-Care, disodium octaborate tetrahydrate, is a borate salt compound that is formed from a union of boric acid and borax. It has a very low toxic level to humans and pets, but is very effective against insects and fungus.

Is Bora care toxic to humans?

Unlike soil termiticides and fumigation, Bora-Care’s active ingredient is a natural borate mineral salt less toxic than table salt to humans, fish, birds and mammals, but deadly to insect pests.

Can you make Bora care with borax?

We made a batch of the Boracare copy using borax, boric acid, and propylene glycol, but heating propylene Glycol to 260 degrees F is scary (hotter than flash point), and the high concentration of glycol discolored the wood and left a blotchy look. … We made both the 10% and the 15% versions.

What is borate wood treatment?

Borate wood preservatives are composed of naturally occurring minerals that protect wood from fungus, termites, and other wood-decomposing organisms. … Borate wood preservatives are low-toxicity treatments used primarily on indoor wood that is protected from weather.

How do you use disodium Octaborate Tetrahydrate?

Disodium Octaborate Tetrahydrate (or DOT) is a white, odorless, powdered substance containing the basic elements of boron and oxygen, and is most often used in pest control products that are designed to target wood destroying insects such as termites, carpenter ants, and powderpost beetles.

Is borate the same as boric acid?

Borax and boric acid are two different formulations of the same compound. … Boric acid is its extracted, processed and refined form, found in a variety of chemical products. Some common uses for borax include: Laundry detergent.

How do you use a borate Rod?

Rods are placed into holes drilled in wood at key locations. As the rods dissolve, the borate preservative migrates to areas of highest moisture and concentrates where wood is most susceptible to decay. If the wood dries the rods stop diffusing. The residual preservative remains in place.

Why is borax banned?

The EU has banned borax on claims of impacts on reproductive health, following studies on mice and rats at high (abnormally high) ingested doses. … This study crucially relates to boric acid, not borax, and investigates the reproductive effects of boron exposure in workers employed in a boric acid production plant.

Does Bora care dry sticky?

The reason is that the glycol which is in the Bora Care solution and acts as the penetrate, can be sticky and messy if over applied. Let it dry for as long as possible, usually at least 48-72 hours before staining.

Does Boracare leave residue?

Answer: Boracare should not leave any kind of visible residue once it has dried. … In most cases, it takes 24-48 hours for a Boracare application to dry thoroughly.

Does Bora care smell?

BORA-CARE is odorless, colorless and can be directly applied to wood surfaces. … Since BORA-CARE has no odor or toxic fumes, it may not even be necessary to leave your home or office during application. Wood treated with BORA-CARE is non-toxic to people and animals.

How long will Bora care last?

For registered pest control companies registered under the BoraShield program, Levels 1-3 cover product replacement, labor and damage repair up to $2500 for a period of 12 years. The mold protection in Levels 4 and 5 covers product replacement for 25 years.

How do you inject Boracare into wood?

Press and hold the injection tip firmly into each hole and inject Boracare until runoff is observed from other holes, galleries, kick-out holes, etc. You may get splash back if the wood is solid. Release the trigger, wait briefly and withdraw the injection tip.

How do you mix borax for Wood?

6 parts of borax and 4 parts of boric acid. To prepare one gallon of a 10% solution, start with an oversize container (larger than 1 gallon ) add 1 lb. of powder to appx 3 qts of water agitating until the powder has dissolved, then add additional water to end up with 1 gallon of mix.

How long does Bora-care last on wood?

Bora-Care will remain for the life of the treated wood, so no retreatments are necessary. 6 of 7 people found this answer helpful.

Is borax a good wood preservative?

From modern homes and offices to the wooden furniture within them, borax plays an important role in protecting wood and wood-product construction and materials from fire, fungi, and pests. Borax is even used for historic landmark preservation, such as buildings and ships, for total wood protection.

Does Boracare soak into wood?

Boracare will absorb all the way into the wood and eliminate any infestation that is there and last for the life of the wood.

Can Bora care be used on treated wood?

Answer: Yes, Boracare can (and in many instances MUST) be used on pressure treated wood. As a termite barrier under Section VI of the label it is required to be applied twice to exterior wall sill plate and that is always pressure treated.

Is Bora care toxic to dogs?

Is Bora-Care Safe for Pets? Bora-Care is safe for pets and humans once treated surfaces have dried. Even though the termiticide continues to work for years, the low toxicity levels mean everyone but the termite colony is safe.